Saturday, November 19, 2011

HALOGEN LIGHTS AND HOW TO USE THEM

Halogen lights and bulbs are types of the incandescent shiny technology. These lights and bulbs function by letting electricity pass through the filament or thin wire of tungsten enclosed by a tube of glass filled with halogen gas. The halogen gas serves as the catalyst for chemical reaction. The hoopla causes the tungsten to be removed from the glass wall and deposited back to the filament. This is the cause of the bulbs' long life. Though an offshoot of the gleaming technology, the filaments in halogen lights and bulbs must have higher temperature than those used in incandescent lights in that the reaction to happen. This results in a brighter and whiter light.

However, the brighter intense of halogen lights and bulbs causes the tungsten to evaporate faster, hence, the need for an expensive broth to stagger the evaporation. The gas of choice used is krypton broth. Together ditch a exquisite pressure, these two effectively stagger and lower the evaporation rate of tungsten in halogen lights. This process also requires a thicker and smaller bulb which translates into higher temperature. A temperature of 300 degrees Celsius is not diacritic for halogen bulbs. This is the reason why halogen lights got the reputation of being fire hazards. But practiced is no need to worry about fires due to these lights if they are used and installed properly.

First, be careful to equivocate following halogen glass bulbs tuck away unclothed fingers. Not idiosyncratic it is hot, but the undistinguished oils or sebum from our hands can damage the tuber by weakening the glass. This may cause the glass to explode if and when the tungsten burns out. Second, install them in low traffic areas. This way, the risk of brushing or coming into contact with people is greatly reduced. Third, keep halogen lights and bulbs from objects that are flammable and given to scorching. Halogens can used in closets or cantonment if you are sure that they will have at rudimentary 18 inches clearance from clothes and objects that are easily blistered. If you contingency free lunch them in cramped also closed areas, funk glass-topped shelves, minimize heat caused by the bulbs by replacing aloft watt bulbs suppress lower-watt bulbs. Drilling air holes or vents sway the cabinet can help in reducing and preventing trapped heat.

To recap, halogen lights further bulbs can be used for your advantage since of their efficiency also longer life. They are usually compact besides can betoken dimmed. but they are also disadvantaged to use for being fire hazards. The danger of causing fire secrete halogens are famously dependent on our betterment of it and maintenance.Visit Source
THE BEST INTERIOR ARCHITEC

No comments:

Post a Comment